BDYXG - F-150,GRN RET,MIL-P-24441/1,5804
- MSDS: BDYXG
- Manufacturer: INTERNATIONAL PAINT COMPANY INC
- Product Name: F-150,GRN RET,MIL-P-24441/1,5804
- National Stock Number: 8010-00-437-6757
Product Identification
Product ID:F-150,GRN RET,MIL-P-24441/1,5804
MSDS Date:07/02/1986
FSC:8010
NIIN:00-437-6757
MSDS Number: BDYXG
Responsible Party
UNION, NJ 07083
Emergency Phone: 201-686-1300
Info Phone: 201-686-1300
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
AROMATIC SOLVENT (SOLVENT NAPHTHA,PETROLEUM LIGHT
CAS: 64742-95-6
Fraction By Weight: 25-30%
OSHA PEL N/K
ACGIH TLV: N/K
EPOXY RESIN
Fraction By Weight: 45-50%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC OVEREXPOSURE TO,AND MISUSE
OF,SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE.SKIN:MAY RESULT IN DERMATITIS OR CAUSE SENSITIZATION OR
OTHER ALLERGIC RESPONSES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHAL:MAY CAUSE
IRRITATION.SKIN:IRRITATING.EYES:CAN CAUSE IRRITATION WITH
REDNESS,TEARING AND BLURRED VISION.INGEST:MAY CAUSE
GASTROINTESTINAL IRRITATION.
Medical Cond Aggravated by Exposure:REPEATED EXPOSURE MAY CAUSE
SENSITIZATION IN CERTAIN PEOPLE.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR.GIVE ARTIFICIAL RESPIRATION IF
NEEDED.GET MEDICAL ATTENTION.SKIN:REMOVE CONTAMINATED CLOTHING.WASH
SKIN WITH PLENTY OF SOAP AND WATER.LAUNDER CLOTHES BEFORE
REUSE.EYES:FLUSH IMMEDIATELY WITH LARGE QUANTITIES OF H*2O FOR AT
LEAST 15 MINUTES.GET MEDICAL ATTENTION IMMEDIATELY.INGEST:CALL A
PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT TO INDUCE
VOMITING.
Fire Fighting
Flash Point:115F,46C
Upper Limits:
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL.WATER MUST NOT BE
USED AS AN EXTINGUISHING MEDIA.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .SMOTHER FLAMES WITH ONE OF MEDIA ABOVE.H*2O MAY BE USED
TO COOL CLSD CNTNRS.(SEE SUPP DATA)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT.DO NOT USE
WHERE SPARKS OR OPEN FLAME PRESENT.CLSD CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.THERMAL DECOMP (SEE SUPP DATA)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID PROLONGED
INHALATION OF VAPORS.VENTILATE AREA.CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:AVOID BREATHING DUST OR CHIPS FROM
SANDING OR BLASTING SURFACES COATED WITH PRODUCT.STORE IN BUILDING
IAW REGULATIONS FOR OSHA CLASS II COMBUST LIQ.
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:RECOMMENDED.
Eye Protection:CHEM WORK GOGG,FACESHLD OPTIONAL.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
WEIGHT/GAL:10.SPECIAL FIRE FIGHTING PROC:TAKE CARE TO PREVENT SPREAD OF
BURNING LIQ W/WATER.UNUSUAL FIRE & EXPLO HAZ:PRODUCTS INCLUDE
CO,CO*2,VARIOUS HYDROCARBON FRAGMENTS & ALDEHYDES. KEY1;F4.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:308F,153C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>1 (AIR=1)
Spec Gravity:1.2019
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:N/K
Percent Volatiles by Volume:26
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT,FLAME OR
SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,VARIOUS
HYDROCARBON FRAGMENTS,ALDEHYDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NO INCINERATE UNOPENED
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.